What SSUG Grade Means for Procurement Teams
SSUG stands for Sub Standard Under Grade. Within the standard East African sisal grading system, it describes line fiber that falls short of full UG (Under Grade) conformity, yet retains sufficient length and tensile character to be exported as line fiber rather than downgraded to tow. For many rope manufacturers, fiber composite processors, and yarn spinners, the distinction between UG and SSUG is less critical than fiber length consistency and impurity levels. SSUG can be a deliberate procurement choice, not a fallback, when your process tolerates slightly broader variation and your cost target is tighter.
Buyers sourcing from Kenya should understand that grading is applied post-decortication and brushing. The fiber leaves the processing stage as natural white strands, bundled and baled before export. SSUG fiber is sold as raw line fiber, not bleached, chemically treated, or dyed.
SSUG Grade Sisal Fiber Specifications
The table below summarizes the key physical parameters associated with SSUG grade material based on available trade and grading evidence. Buyers should request a current specification sheet and, where possible, a sample lot to verify against their own process standards before committing to a full container order.
| Parameter | SSUG Grade (Indicative) |
|---|---|
| Fiber type | Raw natural sisal line fiber |
| Plant source | Agave Sisalana |
| Color | Natural white / creamy white |
| Fiber length (indicative) | Approximately 80 cm to 120 cm |
| Grade classification | Sub Standard Under Grade (SSUG) – exported as line fiber |
| Bale packaging (indicative) | Approximately 250 kg per bale |
| Origin | Kenya |
Note: Moisture content, impurity percentage, and tensile strength figures have not been independently verified for this specific listing. Request a current technical data sheet and pre-shipment inspection report before finalizing your order.
Industrial Applications for SSUG Sisal Fiber
SSUG grade fiber competes for many of the same end-use markets as UG, making it a practical input across several industries.
Rope and Cordage Manufacturing
Sisal line fiber is a traditional raw material for twisted and braided rope. The natural surface texture and resistance to wear make it suitable for agricultural twine, baling rope, and general-purpose cordage. SSUG fiber is commonly processed into 2-ply and 3-ply twisted products where absolute fiber uniformity is secondary to cost and volume availability.
Yarn Spinning and Woven Products
Spinning mills that produce sisal yarn for rugs, mats, and woven cloth can work with SSUG alongside UG, blending grades to hit target yarn characteristics. The natural white color means the fiber takes dye consistently, which matters for finished textile buyers. See our Sisal Yarns listing for processed yarn options if you require a further-converted product.
Fiber Composite and Reinforcement
Natural fiber composites used in automotive panels, construction boards, and packaging materials increasingly use sisal as a renewable reinforcement alternative to glass fiber. Sisal is strong, pliable, alkali-resistant, and corrosion-resistant, which makes it well suited for resin matrix applications. SSUG grade fiber length (80 cm to 120 cm) is generally compatible with composite manufacturing that involves cutting or chopping to a target staple length.
Geotextiles and Erosion Control
Shorter line fiber and tow material from sisal are used in erosion control matting and biodegradable geotextiles. While 3L grade is preferred for some geotextile specifications, SSUG is used where fiber length requirements are more flexible.
How SSUG Compares to Other Sisal Grades
Understanding where SSUG sits in the grading hierarchy helps procurement teams make the right sourcing decision without over-specifying.
3L (3 Long) Grade
The longest and most consistent fiber, typically above 90 cm to 100 cm with very low impurity. Used for premium rope, high-strength yarn, and demanding composite applications. See Sisal Fiber Grade 3L (3 Long) for this option.
UG (Under Grade)
Conforms to standard export line fiber specifications. Length typically runs from around 110 cm to 130 cm in the Kenya trade. Lower impurity and more consistent fiber diameter than SSUG. Often the default specification for mid-range rope and yarn production. Compare Sisal Fiber UG Grade side by side if your process requires tighter tolerances.
SSUG
Does not conform to full UG line standards but is still exported as line fiber, not tow. Fiber length in the 80 cm to 120 cm range. A cost-effective option for applications where fiber length variation is acceptable and where input cost is a priority factor.
Tow Grades
Short fiber and waste fiber from decortication and brushing. Used for padding, stuffing, geotextile mats, and lower-specification composites. If SSUG is still longer than your process requires, our Sisal Fiber Short Fiber Tow 1 and Sisal Fiber Short Fiber Tow 2 listings may suit.
Bulk Pricing and Minimum Order Quantities
Pricing for SSUG grade sisal fiber is not published at a fixed rate on this page because export prices respond to seasonal supply, freight rates, currency movements, and order volume. Market references in the trade show SSUG and UG grade fiber has been quoted at varying price points per metric ton depending on origin, impurity specification, and bale format. Contact us directly for a current FOB Mombasa price, CIF, or delivered price depending on your Incoterm preference.
Minimum order quantities and production capacity details are available on request. Buyers sourcing less than a full container load should specify their requirement clearly so we can advise on consolidation options.
Export Documentation and Buyer Considerations
Kenya-origin sisal fiber exported to the United States is subject to standard US Customs and Border Protection import procedures. Buyers and their freight forwarders typically require a commercial invoice, packing list, certificate of origin, phytosanitary certificate (for raw plant fiber), and bill of lading. Specific documentation requirements depend on the intended use, the customs broker you work with, and any state-level agricultural import rules that may apply to raw plant material.
We do not make specific claims about certifications or compliance status on this page beyond what is verifiable. Buyers with specific organic, fair trade, or sustainability certification requirements should state this at inquiry stage so we can confirm current certification status.
Request a Quote for SSUG Grade Sisal Fiber
To receive a bulk quote for Sisal Fiber SSUG Grade, use the inquiry form on this page or contact our trade team directly. Please include your target volume in metric tons, preferred Incoterm, destination port, and any specification requirements such as maximum impurity percentage or fiber length range. We respond to serious trade inquiries promptly. Samples can be arranged for qualifying buyers prior to a full container commitment.
Browse the full Sisal Fiber range to compare all available grades and converted products before placing your inquiry.

Reviews
There are no reviews yet.